GE AJCM 08 ACD Air Conditioner Controls, Remote Control, Consumer, On/Off, Display, Mode

Cleaning Operating Instructions Safety Instructions

About the controls on the air conditioner—Cool Only Models

Appearance may vary.

Air Conditioner Controls Remote Control

Lights beside the touch pads on the air conditioner

control panel indicate the selected settings.

Controls

Support Troubleshooting Tips Installation Instructions Care and

ON/OFF

Turns air conditioner on and off.

Display

Displays the temperature setting. Displays hours when setting the timer.

MODE

On the remote control, use to set the air conditioner to COOL or FAN mode.

On the air conditioner controls, use to set COOL or FAN mode at HIGH, MED or LOW fan speed. Indicator lights on the air conditioner controls will show the mode and fan speed selected.

TEMP Increase + /Decrease – Pads

Use to set temperature when in COOL mode.

Fan Speeds (Remote control only)

Use to set the fan speed at LOW, MED

or HIGH.

TIMER

ON—When the air conditioner is off, it can be set to automatically turn on in half an hour to 24 hours at its previous setting.

Each touch will set the time in half hours up to 10 and then in hours up to 24.

To cancel the On Timer, press the ON pad until the display time disappears.

OFF—When the air conditioner is on, it can be set to automatically turn off in half an hour to 24 hours. Each touch will set the time in half hours up to 10 and then in hours up to 24.

To cancel the Off Timer, press the OFF pad until the display time disappears.

SLEEP

Press to set the air conditioner to run for

8 hours before it automatically returns to the previous setting.

When the sleep timer is set, the set temperature will automatically increase 2°F after the second hour then 1°F each hour over the next two hours.

To cancel the sleep mode, press the

MODE pad or the SLEEP pad a second time.

Remote Control Signal Receiver

NOTE: When the air conditioner is turned on,

it will automatically start in the setting last used.

Consumer

Remote Control

nTo ensure proper operation, aim the remote control at the signal receiver on the air conditioner.

4n The remote control signal has a range of up to 21 feet.

nMake sure nothing is between the air conditioner and the remote control that could block the signal.

nMake sure batteries are fresh and installed correctly—see the Care and Cleaning section.