Care and Cleaning Operating Instructions Safety Instructions
About the controls on the air
Appearance may vary.
Air Conditioner Controls | Remote Control |
Lights beside the touch pads on the air conditioner |
|
control panel indicate the selected settings. |
|
Controls
ON/OFF | TIMER | |
Turns air conditioner on and off. | ||
Display | be set to automatically turn on in half an | |
hour to 24 hours at its previous setting. | ||
Displays the temperature setting. Displays | ||
Each touch will set the time in half hours | ||
hours when setting the timer. | ||
up to 10 and then in hours up to 24. | ||
|
Troubleshooting Tips Installation Instructions
MODE
On the air conditioner controls, use to set COOL, HEAT or FAN mode. Indicator lights on the air conditioner controls will show the mode selected.
TEMP Increase + /Decrease – Pads
Use to set temperature when in COOL or HEAT mode.
FAN Speeds
Use to set the fan speed at LOW or HIGH. Indicator lights will show the speed selected.
To cancel the On Timer, press the ON pad until the display time disappears.
To cancel the Off Timer, press the OFF pad until the display time disappears.
Remote Control Signal Receiver
NOTE: When the air conditioner is turned on,
it will automatically start in the setting last used.
Consumer Support
Remote Control
n | To ensure proper operation, aim the | n | Make sure nothing is between the air |
| remote control at the signal receiver |
| conditioner and the remote control that |
| on the air conditioner. |
| could block the signal. |
n | The remote control signal has a range | n | Make sure batteries are fresh and installed |
| of up to 21 feet. |
|
6
