25941_EM_Z2100GS manual.qxd 7/7/05 8:32 AM Page 9

INSTALLATION

Remove all packing material and accessories. Examine the oven for any damage such as dents or broken door. Do not install if oven is damaged.

NOTE: This unit is not designed for 50 Hz or any circuit other than a 120-volt/ 60-Hz AC circuit. This oven is designed for countertop installation.

Countertop Installation

1.Select a level surface that provides enough open space for the intake and/or outlet vents.

Minimum clearances required between the oven and any adjacent walls are shown above.

•Leave a minimum clearance of 8 inches above the oven.

•Do not remove the legs from the bottom of the oven.

•Blocking the intake and/or outlet openings can damage the oven.

•Place the oven as far away from radios and TV’s as possible. Operation of microwave oven may cause interference to your radio or TV.

•If the cabinet is covered with a protective film, remove the film.

2.Plug your oven into a standard 120-volt / 60-Hz household outlet. Be sure the electrical circuit is at least 15 amperes and that your microwave oven is the only appliance on the circuit.

WARNING: Do not install oven over a range cooktop or other heat-producing appliance. If installed near or over a heat source, the oven could be damaged and the warranty would be void.

UP SET

9