Sanyo EMS-8600S Grounding Instructions, Utensils, Electric Shock Hazard, Personal Injury Hazard

GROUNDING INSTRUCTIONS

To reduce the risk of injury to persons:

DANGER

Electric Shock Hazard

•Touching some of the internal component scan cause serious personal injury or death. Do not disassemble this appliance.

WARNING

Electric Shock Hazard

•Improper use of the grounding can result in electric shock. Do not plug into an outlet until appliance is properly installed and grounded.

Three-pronged (grounding) plug

Properly polarized and grounded outlet

This appliance must be grounded. In the event of an elec- trical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current. This appliance is equipped with a cord having a grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded. Consult a qualified electrician or service person if the grounding instructions are not completely understood or if doubt exists as to whether the appliance is properly grounded. If it is necessary to use an extension cord, use only a 3-wire extension cord that has a 3-pronged grounding plug, and a 3-slot receptacle that will accept the plug on

the appliance.

•A short power-supply cord is provided to reduce the risks resulting from becoming entangled in or tripping over a longer cord.

•Longer cord sets or extension cords maybe used if care is exercised in their use.

•If a long cord or extension cord is used:

1)The marked electrical rating of the cord set or extension cord should be at least as great as the electrical rating of the appliance.

2)The extension cord must be a grounding-type 3-wire cord, and

3)The longer cord should be arranged so that it will not drape over the counter top or tabletop where it can be pulled on by children or tripped over unintentionally.

UTENSILS

CAUTION

Personal Injury Hazard

•Tightly-closed utensils could explode. Closed containers should be opened and plastic pouches pierced before cooking.

See following page for further instructions “Materials you can use in microwave oven or to be avoided in microwave oven.”

Utensil Test:

1.Fill a microwave-safe container with 1 cup of cold water (250 ml) along with the utensil in question.

2.Cook on maximum power (PL 10) for 1 minute.

3.Carefully feel the utensil. If the empty utensil is warm, do not use it for microwave cooking. Do not exceed 1 minute testing time.

CAUTION:

1.Do not use plastic containers for testing.

2.Some containers and dishware may be warm (or hot) in only one area. Do not use a container that becomes warm anywhere.

-6-