Sanyo FXCD-500 manual

CD Player

If a problem should occur while operating the built-in CD player, one of the following error signs may be displayed

Error Sign			Cause
Jf	J7	I	Abnormal mechanism function
J,	J,(	1

Remedy

Press the eject button

Turn the power off and then on again If it is not corrected, contact the place of Durchase

I!!	1’	1’	The	disc	is inserted	incorrectly	Eject	the disc and insert it properly
Ja-	Jl	I	The	disc	is dirty		Clean	the disc
			The	disc	is defective		Use another disc
			There is condensation on the optical				Leave	the disc player off for	an hour
			lens				or so, then try again		I
			Internal		connection	check error	Turn the power off and then		on again
							If it is not corrected, contact the place
							of purchase

CD Changer

If a problem should occur while operating the connected CD changer, one of the following error signs may be displayed

	Error	Sign		1		Cause		I	Remedy
				Abnormal	mechanismfunction			Contact the place of purchase
				The disc was		inserted	incorrectly	Insert the disc properly
				The disc	is dirty			Clean the	disc
				The disc	is defective			Use another disc
				There is condensation			on the optical	Leave the disc player off for an hour
				lens				or so, then	try again
								Refer to the instructions supplied with
								the CD changer
				Excessive temperature			has been de-	Allow the car to cool
				tected in the vehicle
				The magazine		is not fully inserted into		Completely	insert the magazine into
								the changer until it clicks into place
n	o	c	d	tNhoedc~%he		magazine		Load discs into the magazine

-18-