ELECTRICAL CONNECTIONS
I-- - - - P-speaker System - - - -\
l
l
l
I (Ga
:0 (Gray/Bl& (Green)
i (Green/Bw
I (vi-
i (Violet/Black)B \ - - - - - - - -
+12V Constant Power Supply (Yellow)
3
4 Ground Wire (Black)
5 Power Antenna (Blue/Red)
6 Amplifier Turn On (BluejWhite)
DO NOT connect any speaker wires to the metal body or chassis of the vehicle
Connect each speaker wire directly to each speaker terminal All speaker common
Left
Speaker
Right
Speaker
Do Not
Connect
Do Not
Connect
1Antenna socket
l lnserttheplugfromtheantennainstallecl in yourvehicleintothissocket (Ifyourvehiclehasadualantenna system, a dual antenna to single antenna cable adaptor may be required )
2+12V Constant Power Supply (Yellow)
l Connect this wire to the +12V power terminal which receives power continuously l Connect to location drawing 10 A amperage or more
3+12VAccessory/Switched (Red)
l Connectthis wire to the terminal which receives power while the ignition switch is at ON or ACCESSORY position
l Ifthe ignition switch does not have an ACC position, connect this wire to a +12V power terminal which re-
ceives power continuously (Same as item 2 )
l Connect to location drawing 100 mA amperage or more
4Ground wire (Black)
l Connect this wire to the vehicle chassis
5Power Antenna (Blue/Red)
l Connect this wire to the control terminal of a Power Antenna l When not using a Power Antenna, this wire is not connected
6Amplifier Turn On (Blue/White)
l Connect this wire to an external amplifier
l When not using an external amplifier, this wire is not connected
