GETTING STARTED (REQUIRED INITIAL SETUP) Continued

3 Connect Signal to the DTV’s an Analog 75 ohm Antenna Input terminal.

Analog RF Antenna Connection

Connect a Cable signal (with or without a cable box) or RF antenna to the Analog RF input.

RF

ANALOG CABLE

CABLE BOX OR

ANTENNA

 

SATELLITE BOX

 

 

OR OR

DTV BACK

THE TUNER IN THIS DTV CAN RECEIVE:

1.Digital and / or Analog Off-Air Signals from an RF antenna.

OR

2. Analog or ClearQAM cable channels.

Note:You must search for ClearQAM channels using the “Digital Cable Search” menu option.

OR

3. The output from a VCR or cable box.

Digital signals from a Set-Top (STB) Box should be received through the Component jacks.

This DTV can receive ANY unscrambled RF signal being broadcast.

4 Plug AC Power Cord (supplied) into an electrical outlet as shown here.

To 120 V AC outlet.

5 Press the POWER key. (Follow on-screen instructions).

POWER

6 Perform “All Channel Search.” The All Channel Search will search for off-air digital and analog channels, and analog cable channels. The DTV can receive cable or off- air channels, but not at the same time. If after two searches the DTV still fails to detect any channels, the DTV will tune to Video1.

➠

Channel Search [Analog & Digital] on-screen display

14