MENU OPTION—CH (CHANNEL) SCAN MEMORY

DELETING ANALOG OR DIGITAL CHANNELS FROM MEMORY

Channel Scan Memory is a list of active channels that you can scan through using the Channel Scan CH ▲ (up) CH ▼ (down) keys. This list can be customized by deleting and/or adding channels.

1 Press the MENU key to display the Main menu.

2 Use the CURSOR ▲▼ keys to highlight CH Scan Memory. Use the CURSOR > key to select the channel number area.

3 Use the CHANNEL (CH ▲▼) keys or numerical 0 ~ 9 keys to select desired channel. HINT: Press the TUNER key to switch between Digital and Analog Channel Scan memories.

4 Press the ENTER key to delete the channel. The display will change to “deleted.”

After 3 seconds the TV screen will display “Add?”

OPERATING TIPS:

■When a digital channel is deleted, all of that channel’s sub-channels are deleted as well.

■Only previously deleted digital channels can be added back to the Channel Scan Memory.

HELPFUL HINTS (PROBLEMS/SOLUTIONS)

SYMPTOM

CHECK THESE CONDITIONS

TRY THESE SOLUTIONS

 

 

 

Cannot select or scan some

● Channels may be removed from

● Select Channel Scan memory and

channels.

memory.

manually add channels or start an

 

● Check antenna connections.

“All Channel Search.”

 

 

● NO digital signal being broadcast.

● Weak Signal.

● Turn antenna, install signal

booster.

● V-Guide is set to block

● Set V-Guide to “Off” or press

programming.

RESET key to clear all settings and

 

 

restart channel search.

If you continue to experience problems, please call toll free

1-800-877-5032. We can Help!

 

35