Sanyo HV-DX1E manual Before Use Cont’d, Precautions, About Symbols, Setting the Output Source

Before Use (Cont’d)

Precautions

Handling the unit

When shipping the unit

The original shipping carton and packing materials come in handy. For maximum protection, re-pack the unit as it was originally packed at the factory.

When setting the unit

The picture and sound of a nearby TV or radio may be distorted during playback. In this case, position the unit away from the TV or radio, or turn off the unit after removing the disc.

Do not install this equipment in a confined space, such as a book case or built in cabinet.

To keep the surface clean

Do not use volatile liquids, such as insecticide spray, near the unit. Do not leave rubber of plastic products in contact with the unit for a long period of time. They will leave marks on the surface.

Cleaning the unit

To clean the cabinet

Use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened with a mild detergent solution. Do not use strong solvents, such as alcohol, benzine, or thinner, as these might damage the surface of the unit.

To obtain a clear picture

The DVD+VCR is a high-tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn down, the picture quality will be poor.

Regular inspection and maintenance are recommended after every 1,000 hours of use. (This depends on the operating environment.)

For details, please contact your nearest dealer.

Notes on Discs

Handling discs

Do not touch the playback side of the disc.

Hold the disc by the edges so that fingerprints will not get on the surface.

Do not stick paper or tape on the disc.

Storing discs

After playing, store the disc in its case.

Do not expose the disc to direct sunlight or sources of heat, or leave it in a parked car exposed to direct sun- light, as there may be a considerable temperature increase inside the car.

Cleaning discs

Fingerprints and dust on the disc can cause poor pic-
ture quality and sound distortion. Before playing, clean	INTRODUCTION
the disc with a clean cloth. Wipe the disc from the cen-

ter out.

Do not use strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or anti-static spray intended for older vinyl records.

About Symbols

About the symbol display

“ ” may appear on the TV screen during operation. This icon means the function explained in this instruc- tion manual is not available on that specific DVD video disc.

About the disc symbols for instructions

A section whose title has one of the following symbols is applicable only to those discs represented by the sym- bol.

DVD DVDs

VCD2.0 Video CDs with the PBC (playback control) function

VCD1.1 Video CDs without the PBC (playback control) function

CD Audio CDs

MP3 MP3 discs

Setting the Output Source

You must select one of your output sources (DVD or VCR) to view on the TV screen.

•If you want to view output source of DVD deck: Press DVD on the remote or DVD/VCR on the front panel until DVD indicator on the front panel lights and output source of DVD deck is viewed on the TV screen.

•If you want to view output source of VCR deck: Press VCR on the remote or DVD/VCR on the front panel until VCR indicator on the front panel lights and output source of VCR deck is viewed on the TV screen.

•To select output source, press the OUTPUT SELECT button on the remote control. Please see below.

Note the DVD+VCR must be tuned into the TV stations before this feature can operate correctly.

Operates only after Auto Tuning operation.

Cycles through the 3 main output views: DVD, Tuner and VCR.

DVD: To view the current DVD deck status. (disc playback, DVD menu or setup menu, etc)

Tuner: To view TV programmes through TV tuner.

VCR: To view the current VCR deck status (tape playback, VCR programming or viewing TV programmes through the VCR tuner, etc).

5