Sanyo HV-DX1E manual Setting the clock Manually, To set the colour system, Auto, Pal, Mesecam

Before Operation - VCR part

Setting the clock Manually

The clock in your DVD+VCR controls time, day and date settings for your DVD+VCR.

For VIDEO Plus+ system to work correctly the cor- rect time and date must be set. The clock is set auto- matically during ACMS (Automatic Channel Memory System) when your DVD+VCR detects a channel that broadcasts a Teletext signal.

If the broadcast signal is weak the clock will not be set and will require setting manually.

1Press F or G to select TIME DATE and press

OK.

The auto adjust mode can be set to “OFF” by

pressing D or E if you want to set the time man- ually.Press i.

AUTO ADJUST : ON

- -

1 2

TIME	OK i
DATE

2Use the numerical buttons or press ▲/▼ or F/G on the remote control to alter the HOURS, MIN- UTES, DAY, MONTH and YEAR.

Please note your DVD+VCR uses a 24-hour clock. e.g. 1pm will be displayed as 13:00.

The day of the week will appear automatically when you enter the year.Press OK.

To set the colour system

Your DVD+VCR is equipped with dual colour standard, you can play back a tape in PAL and MESECAM. During playback your DVD+VCR detects the colour sys- tem automatically.

If there is any colour problem please select the colour system manually.

1The main menu will appear on the TV screen.Press i.

			1 2		A B	VCR
REC	PSET	Pr-12	TIME	SYS-	C	Dr.
		ACMS
	R		DATE	TEM	OSD
fOSD			NIC			REC
ON	16:9	DPC				OK i
OFF	4:3

2 Press F or G to select the SYSTEM.

Press OK.

			1 2		A B	VCR
REC		Pr-12	TIME	SYS-	C	Dr.
	PR	ACMS	DATE	TEM	OSD		SYS-
fOSD			NIC				TEM
ON	16:9	DPC					OK i
OFF	4:3

3 Press D or E to select according to the

COLOUR system used.

	HH	MM	DD	MM	YY
	- - : - -		- - . - - . - -			- - -
1	2
TIME						i
DATE

If you make a mistake	press F or G and enter
3 the correct details.

	HH		MM	DD		MM	YY
	11	:	45	15	.	04 .	02	MON
1	2
TIME								i
DATE

4screen.

Your new clock settings are stored and will appear on your DVD+VCR’s Display.Press i to remove the menus from the TV

	AUTOPr-12	1 2		A B	VCR
REC		TIME	SYS-	C
	PRPALACMS	DATE	TEM	OSD Dr. SYS-
fOSD	MESECAMNIC				TEM
					OK i
ON	16:9
OFF	4:3 DPC

AUTO:

Allows PAL or MESECAM signals to be distinguished automatically.

PAL:

Use when receiving PAL signals or use when playing back a tape recorded in PAL system.

MESECAM:

Use when receiving MESECAM signals or use when playing back a tape recorded in MESECAM system

4 Press i to remove the menus from the TV screen.

16