Sanyo HV-DX1E manual Hi-Fi Stereo Sound System, Widescreen Compatibility, BIL Nicam

Additional Operation - VCR part

Hi-Fi Stereo Sound System

Your DVD+VCR will record and play back Hi-Fi stereo sound. In addition it has a NICAM digital stereo sound decoder. This allows you to record and play back the sound in several different ways. Video cassettes record- ed on your DVD+VCR will have a normal mono audio track and two VHS Hi-Fi stereo audio tracks. These stereo tracks allow you to make audio recordings in Hi- Fi stereo or bilingual mode from a TV broadcast, stereo audio system, video disc or another Hi-Fi VCR.

Your DVD+VCR’s NICAM digital sound decoder

1 allows you to enjoy broadcasts with NICAM sound, as well as standard stereo NICAM, bilin- gual and mono sound.

The particular type of sound received or that recorded will be briefly displayed on the TV screen for a couple of seconds:

STEREO

Sound is automatically recorded on the Hi-Fi stereo and mono tracks of the video tape.

BIL NICAM

Both audio channels will be recorded on the Hi-Fi stereo tracks. The primary language channel (left) will be recorded on the mono track of the video tape.

MONO

The sound is recorded on the Hi-Fi tracks and the mono track of the video tape without any separation.

STEREO

2mode appears.

The choice is STEREO, LEFT (left channel), RIGHT (right channel) and MONO.

In BIL NICAM playback the primary language is output on the left channel and the secondary lan- guage is output simultaneously from the right chan- nel when audio output is set to STEREO.

The primary language will be output from both channels when the audio setting is MONO.

Please note that when adjusting the tracking control Hi-Fi stereo sound may revert to MONO.Press AUDIO repeatedly until the desired audio

3Press i to return to a TV picture.

Note

If the quality of stereo sound being received is poor, the broadcast is automatically received in monaural with better quality.

Still, if the quality of the sound is poor, set NIC in the main menu to OFF (see p. 13). NICAM broad- casts will be detected.

Widescreen Compatibility 16:9

Your DVD+VCR can record and play back widescreen aspect ratio programmes (16:9). To record a wide screen format programme successfully the correct type of widescreen signal must be broadcast by the TV sta- tion.

		Pr-12	1 2		A B VCR
REC	P		TIME	SYS-	C
		ACMS
	RSET		DATE AUTOTEM		OSD Dr.
fOSD			NIC 4:3		16:9
					4:3
ON	16:9	DPC		16:9	OK i
OFF	4:3

1	Press i and	press F or G to select 16:9/4:3.
	Press OK.

216:9.

AUTO:

Automatically plays back Widescreen programmes as Widescreen and Normal programmes as normal.

4:3:

Only for playing back and recording Normal format record- ings (4:3).

16:9:

Only for playing back and recording Widescreen format recordings (16:9).Press D or E repeatedly to select : AUTO, 4:3 or

3Press i to remove the menus.

Note

To enjoy Widescreen playback you must connect your DVD+VCR to the TV using a SCART lead.

32