Sanyo HV-DX1E manual Before Operation DVD part, Sound, Others

Before Operation (Continued) - DVD part

Sound

Digital Audio Output

Each DVD disc has a variety of audio output options. Set the DVD+VCR’s Digital Audio Output according to the type of audio system you use.

DOLBY DIGITAL/PCM: Select “DOLBY DIGITAL/PCM” if you connected the DVD+VCR’s DIGITAL AUDIO OUT

Others

The DRC, Vocal and PBC settings can be changed.
Press 3/4 to select the desired item and press		PREPARATION
SELECT/OK. The setting of the selected item is
changed between On and Off.
Disc Audio	DRC Off
Disc Subtitle	Vocal On

Disc Menu

PBC On

jack to a Dolby Digital decoder (or an amplifier or other equipment with a Dolby Digital decoder). Stream/PCM: Select “Stream/PCM” if you connected the DVD+VCR’s DIGITAL AUDIO OUT jack to an amplifier or other equipment with a DTS decoder, Dolby Digital decoder or MPEG decoder.

PCM: Select when connected to a 2-channel digital stereo amplifier. The DVD+VCR output sounds in the PCM 2ch format when you play a DVD video disc recorded with a Dolby Digital, MPEG1, or MPEG2 recording system.

Disc Audio	DIGITALDOLBY /PCM
Disc Subtitle	Stream/PCM
Disc Menu	PCM
Rating
Country Code	Sample Freq.
TV Aspect	48KHz
Menu Language	96KHz
Digital Audio Output
Others

Sample Frequency

To change the Sample Frequency setting, first select the desired Digital Audio Output as indicated as above. If your receiver or amplifier is NOT capable of handling 96KHz signals, select 48KHz. When this choice is made, this unit will automatically convert any 96KHz signals to 48KHz so your system can decode them.

If your receiver or amplifier is capable of handling 96KHz signals, select 96KHz. When this choice is made, this unit will pass each type of signal through without any further processing.

Rating

Country Code

TV Aspect

Menu Language

Digital Audio Output

Others

Dynamic Range Control (DRC)

With the DVD format, you can hear a programme’s soundtrack in the most accurate and realistic presenta- tion possible, thanks to digital audio technology. However, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds and the quietest ones). Then, you may listen to a movie at a lower volume without losing clarity of sound. Set DRC to On for this effect.

Vocal

Set Vocal to On only when a multi-channel karaoke DVD is playing. The karaoke channels on the disc will mix into a normal stereo sound.

PBC

Set Playback Control (PBC) to On or Off.

On: Video CDs with PBC are played according to the PBC.

Off: Video CDs with PBC are played the same way as Audio CDs.

19