3-4. Remove the Grille to Install the Indoor Unit

3-4-1. Indoor unit types

(KMHS0772, KMHS0972, KMHS1272)

Basically, these models can be installed and wired without removing the grille. If access to any internal part is needed, follow the steps as given below.

CAUTION

Be sure to wear work gloves

during installation to avoid being

 

 

 

cut by the sharp aluminum fins

 

of the heat exchanger.

How to remove the grille

(1)Grasp both ends of the air intake grille, and remove it by opening towards the front and pulling towards you. (Fig. 16a)

(2)Remove the 2 screws. (Fig. 16b)

(3)Remove the screw on the right side cover plate and open the cover. (Fig. 17a)

(4)Take out the thermistor from the grille. (Fig. 17b)

(5)Pull the lower part of the grille toward you to remove. (Fig. 18a)

(6)Use a standard screwdriver to push on the tabs to remove the grille.

How to replace the grille

(1)Reinstall the grille into the lower part while aligning its tabs on the upper part. (Fig. 18b) Insert the tabs in the slots and push the lower part of the grille back into position.

(2)Make sure that the grille and frame are firmly fitted together by engaging the tabs.

(3)Attach the thermistor on the grille. (Fig. 17a)

(4)Close the cover and replace the screw. (Fig. 17a)

(5)Affix the grille with the 2 previously removed screws. (Fig. 16b)

(6)Install the air intake grille.

(a)Allow the edge of the air intake grille to slide into the top of the indoor unit, and then insert it all the way inside. (Fig. 19a)

(b)Press the bottom right and left corners of the air intake grille to attach it to the indoor unit. (Fig. 19b)

NOTE

Attach so that the round pins at the top right and left corners of the air intake grille are inserted into the grooves at the top right and left of the

indoor unit.

Fig. 19b

8

Air intake grille

Grille

Fig. 16a

Screw cover

Fig. 16b

Cover

Thermistor

Thermistor

Fig. 17a

Fig. 17b

Tab

 

*

*

Grille

 

Frame

Tab

Fig. 18a

*

*

Fig. 18b

Groove

Pin

Fig. 19a

Page 8
Image 8
Sanyo KMHS1272 Be sure to wear work gloves, Cut by the sharp aluminum fins, Heat exchanger, How to remove the grille

KMHS1272, KMHS1872, KMHS2472 specifications

The Sanyo KMHS2472, KMHS1272, and KMHS1872 are versatile microwaves that cater to modern kitchen needs, blending functionality with advanced technology. Each model offers a unique set of features, making them suitable for various cooking tasks, from reheating to defrosting and even grilling.

One of the standout features of the Sanyo KMHS series is its inverter technology. Unlike traditional microwaves that rely on pulsing power levels to manage cooking times, inverter technology provides a consistent stream of cooking power. This results in even cooking, ensuring that food is heated thoroughly without cold spots. This feature is particularly beneficial for delicate tasks like melting chocolate or preparing sauces, where precision is crucial.

The KMHS2472, known for its larger capacity, is designed to accommodate family-sized meals with ease. It boasts a spacious interior that allows for larger dishes, making it ideal for Sunday roasts or holiday gatherings. Its sensor cooking options automatically adjust cooking times and power levels based on the moisture released from the food, optimizing results every time.

On the other hand, the KMHS1272 is the mid-range model, striking a perfect balance between size and functionality. It features multiple cooking presets, which streamline meal preparation by allowing users to select one-touch options for commonly microwaved items. This makes it an excellent choice for busy households looking for convenience without compromising quality.

The KMHS1872, while still maintaining a good capacity, focuses on energy efficiency, making it suitable for eco-conscious consumers. This model includes an eco mode that reduces energy consumption during standby, contributing to lower utility bills while still providing the high performance expected from the Sanyo brand.

All models are equipped with advanced safety features, such as a child lock, preventing accidental operation and ensuring peace of mind in households with young children. The stainless steel finish adds a modern touch to any kitchen, while the easy-to-clean interior enhances usability.

In summary, the Sanyo KMHS2472, KMHS1272, and KMHS1872 are not just standard microwaves; they are an investment in convenience and quality cooking. With inverter technology, various cooking presets, and an emphasis on energy efficiency, these models cater to diverse culinary needs, making them a must-have for any contemporary kitchen.