3. How to Install the Indoor Unit

3-1. Remove the Rear Panel from the Unit

(1)Remove and discard the set screw on the rear panel. (Fig. 6)

(2)Press the 2 ▲ marks on the frame cover and disen- gage the stationary tabs from the frame. (Fig. 7)

(3)Remove the rear panel.

NOTE

Tubing can be extended in 5 directions as shown in Fig.

8.Select the direction you need providing the shortest run to the outside unit.

●When left tubing is to be done, switch the drain hose and drain cap. (For details, refer to “Switching drain hose and drain cap” on page 14.)

3-2. Make a Hole

(1)Place the rear panel from the indoor unit on the wall at the location selected. Make sure the panel is hori- zontal, using a carpenter’s level or tape measure to measure down from the ceiling. Wait until after cut- ting the hole before attaching the rear panel to the wall.

(2)Determine which side of the unit you should make the hole for tubing and wiring. (Fig. 9a or 9b)

NOTE

In the case of left-rear tubing, use the measurement points from the edge of the rear panel for precise place- ment of the hose outlet. (Fig. 9a or 9b)

(3)Before making the hole, check carefully that no studs or pipes are directly run behind the spot to be cut.

Set screw only for transportation

Fig. 6

Rear panel

marks

Fig. 7

Right-rear tubing

Left(recommended) tubing

Left-rear

 

tubing

Right tubing

 

Downward tubing

Fig. 8

(KMHS0772, KMHS0972, KMHS1272)

2-3/4" (70 mm)

CAUTION

Also avoid areas where elec- trical wiring or conduits are located.

The above precautions are also applicable if tubing goes through the wall in any other location.

2-3/8" (60 mm)

Fig. 9a

(KMHS1872, KMHS2472)

Fig. 9b

6

Page 5 Page 7
Page 6
Image 6
Sanyo KMHS2472, KMHS1872, KMHS1272 How to Install the Indoor Unit, Remove the Rear Panel from the Unit, Make a Hole
Page 5 Page 7

KMHS1272, KMHS1872, KMHS2472 specifications

The Sanyo KMHS2472, KMHS1272, and KMHS1872 are versatile microwaves that cater to modern kitchen needs, blending functionality with advanced technology. Each model offers a unique set of features, making them suitable for various cooking tasks, from reheating to defrosting and even grilling.

One of the standout features of the Sanyo KMHS series is its inverter technology. Unlike traditional microwaves that rely on pulsing power levels to manage cooking times, inverter technology provides a consistent stream of cooking power. This results in even cooking, ensuring that food is heated thoroughly without cold spots. This feature is particularly beneficial for delicate tasks like melting chocolate or preparing sauces, where precision is crucial.

The KMHS2472, known for its larger capacity, is designed to accommodate family-sized meals with ease. It boasts a spacious interior that allows for larger dishes, making it ideal for Sunday roasts or holiday gatherings. Its sensor cooking options automatically adjust cooking times and power levels based on the moisture released from the food, optimizing results every time.

On the other hand, the KMHS1272 is the mid-range model, striking a perfect balance between size and functionality. It features multiple cooking presets, which streamline meal preparation by allowing users to select one-touch options for commonly microwaved items. This makes it an excellent choice for busy households looking for convenience without compromising quality.

The KMHS1872, while still maintaining a good capacity, focuses on energy efficiency, making it suitable for eco-conscious consumers. This model includes an eco mode that reduces energy consumption during standby, contributing to lower utility bills while still providing the high performance expected from the Sanyo brand.

All models are equipped with advanced safety features, such as a child lock, preventing accidental operation and ensuring peace of mind in households with young children. The stainless steel finish adds a modern touch to any kitchen, while the easy-to-clean interior enhances usability.

In summary, the Sanyo KMHS2472, KMHS1272, and KMHS1872 are not just standard microwaves; they are an investment in convenience and quality cooking. With inverter technology, various cooking presets, and an emphasis on energy efficiency, these models cater to diverse culinary needs, making them a must-have for any contemporary kitchen.
Top Page Image Contents