Sanyo LC-2430 Directory/Speed-Dial, Using the handset directory, Storing names/numbers

CLT2430 5th 8/9 8/10/00 4:29 PM Page 23

DIRECTORY/SPEED-DIAL

The handset and base each has its own memory for storing phone numbers. The handset directory can store 20 names/numbers, while the base speed-dial memory holds up to 10 numbers.

Telephone numbers stored in either the handset directory or base memory can be dialed using just a few key strokes.

Using the handset directory

Storing names/numbers

1Press and hold MEMORY for about 2 seconds until Memory Store is displayed.

A beep sounds.

Memory Store

01

02

2Use or , or enter a two-digit number (01–20) to select the memory location where you

want to store the number.

3 Press INTERCOM/SELECT.

#/1

The following screen appears and a cursor flashes indicating that you can now enter the name.

Store Name

DELETE/SCAN

REDIAL/PAUSE

TONE/*/0

Note:

In memory store operation, you must press a key within

20 seconds or the phone will return to standby. If you return the handset to the base, it will return to standby, too.

If the following screen appears, the selected location is already occupied. Then you can either change the entry in this location, clear the location, or select Go Back to choose another location.

Edit Memory07

Delete Memory07

Go Back

4 Use , , , or DELETE/SCAN to enter the name.

The name cannot exceed 13 characters.

•Use or to scroll through the character menu. It contains upper and lower case letters and various characters.

• Use

and

to move the cursor to the desired location.

•	Press briefly DELETE/SCAN to delete a character.
•	Press and hold DELETE/SCAN to delete all numbers and characters at once.	E19