Sanyo LCD-26XL7 Changing Channels, Selecting Input Source Signal, Selecting a Menu Language

Basic Operations (continued)

Changing Channels

Using the Channel Buttons (CH+ or CH-)

Press the CH+ or CH- to change channels.

When you press the CH+ or CH-, the unit changes channels in sequence. You will see all the channels that the unit has memorized. You will not see channels that were skipped.

Direct Accessing Channels

Press the number buttons to go directly to a channel.

To select a one-digit channel: press the 0-9 number buttons to input the channel number, followed by OK button or wait for some seconds, and the unit automatically goes to the selected channel .

To select a two-digit channel: press the 0-9 number buttons to input the channel number and the unit goes to the selected channel .

To select a three-digit channel: press the 0-9 number buttons to input the channel number and the unit goes to the selected channel.

Note:

When you use the number buttons, you can directly select channels that were skipped.

Using the RETURN button

Press this button to switch between the current channel and the previous channel.

Selecting Input Source Signal

1

2

3

Press the SOURCE button to display the SOURCE menu .
Press 5or6 to select a desired input source.	SOURCE
	VGA
	H D M I
Press 3 or 4 to confirm.	TV
	AV
VGA------Select signal from VGA (D-SUB) jack.	SCART 1
	SCART2 AV
HDMI-------Select signal from HDMI/DVI terminals.	SCART2 YC
TV --------Select TV signal.	YPBPR
	:ADJ
AV(or AV/SV)-------Select signal from AV IN or S-Video terminals.
SCART 1----Select signal from 21-PIN SCART 1 interface.
SCART2 AV-----Select signal from 21-PIN SCART 2 interface.
SCART2 YC-----Select SCART2 YC when viewing Y/C signal from 21-PIN SCART 2 interface.
YPBPR------Select signal from YPbPr terminal.

Selecting a Menu Language

1	Press MENU to display the menu main page.
2	Press 3or4 repeatedly to select SYSTEM menu.
3	Press 6 to access the menu.
4	The [OSD LANGUAGE] item will be highlighted automatically.
	Press3or4to access the selection bar, and then use 3or4to select a
5	desired OSD language.
	Press OK button to exit the menu or press MENU button to return to the
	previous menu.

	SYSTEM
OSD LANGUAGE
OSD H-POSITION
OSD V-POSITION
OSD HALFTONE
OSD DURATION		15 SEC
：SEL	：ADJ	MENU ：EXIT

50

44

50

15

Downloaded From TV-Manual.com Manuals