![](/images/new-backgrounds/1140076/1400767x1.webp)
3
INSTALL THE LENS. (See
1.Remove protective caps(front and back) on the lens.
2.Mount the lens on mounting bracket of the main cabinet with 4 screws.
Use the screws included with the lens. Use the driver included with the lens to fasten the screws.
(After using, keep it for latter use.)
ATTACHED DRIVER
4 INSTALL THE
Install the
Make sure the part no. and mark (TOP and BACK) on
ADJUST FOCUS
Adjust focus following Focus Adjustment on page 6.
LENS MOUNTING BRACKET
Fig-4
Type FE1
(Part No. 610 280 2634)
Fig-5
5 MOUNT THE LENS COVER. (See
When in install the both upper and lower | UPPER LENS COVER |
|
lens covers, install the |
| A |
that it should be placed in the guide slot. |
| |
|
| |
(place of the cover plate had been placed. |
|
|
See |
|
|
sheet is incorrect, it will be the cause of |
|
|
leakage of light or the dust entering at the |
|
|
main cabinet. |
|
|
1. Insert the upper part lens cover and fix |
|
|
them with screws A (4 screws). |
|
|
2. Insert the lower part lens cover and fix | A |
|
them with screws B. (2 screws). |
|
|
| B | |
| LOWER LENS COVER |