Sanyo LNS-T31A, LNS-W31A, LNS-T32 Lens Replacement Procedure for a Type, Fig-1, Fig-2 Fig-3, Fig-4

LENS REPLACEMENT PROCEDURE (FOR "A" TYPE )

Perform the steps 1 to 6 for lens replacement.

First set the lens at the center position with lens shift adjustment.

1REMOVE THE LENS COVER AND LIGHT- BLOCK SHEET (See Figure-1 and 2)

1.Remove 2 screws-A.

2.Press the button (or remove 2 screws-B) on the lower of the lens cover and remove the lens cover.

3.Remove the light-block sheet from the light- block sheet base.

SCREW "A"

BUTTON

LIGHT-BLOCK

SHEET BASE

LENS COVER

Fig-1

LIGHT-BLOCK SHEET

SCREW "B" (Some models)

2REMOVE THE LIGHT-BLOCK SHEET BASE

(See Figure-3 and 4)

1. Slide the light-block sheet base upward.

2.Remove the light-block sheet base.

LENS MOTOR PARTS NO. (LOCATED ON THE LENS)

LIGHT-BLOCK

SHEET BASE

Fig-2

Fig-3

LIGHT-BLOCK SHEET BASE

Fig-4

-2-