Sanyo MPR-414FS Installation of recorder, Optional Component, Refrigerator MTR-0620LH

OPTIONAL COMPONENT

Installation of recorder

Refrigerator (MTR-0620LH)

1.Attach the fixture to the temperature recorder with two screws. (Fig. 1)

2.Remove the screws at the right corner on the top of the unit and fix the recorder to the attachment position. (Fig. 2)

3.Remove a rubber cap and insulation covering the access port on the back of the unit.

4.Take the recorder sensor into the refrigerator chamber through the access port.

5.Fix the recorder sensor on the right wall of the chamber with the enclosed clips. (Fig. 3)

6.Arrange the capillary tube so that it cannot disturb the shelves. Take care not to crush the tube when it is bent.

7.Make a cut on the rubber cap and pass the capillary tube through it. (Fig. 4)

8.Cover the access port with the insulation and rubber cap.

Note:

Fig. 1

Fig. 2

Fig. 3

Fig. 4

The temperature recorder MTR-0620LH can be installed also at the mounting space of temperature recorder (bottom right of the cabinet) if the recorder for freezer (MTR-4014LH) is not installed. In this case, a dedicated recorder fixture (MPR-S30) is needed.

For the installation, refer to “For freezer (MTR-4014LH)” below.

54 22