Sanyo PDG-DWL100 owner manual Powering On/Off the Projector, Powering On the Projector, Lens Cap

Powering On/Off the Projector

Powering On the Projector

Note

Please adjust external speaker volume to the minimum before turn- ing on the projector.

After the user presses the power button and green LED glitters, it takes a little time for the projector to project the image.

1.Ensure that the power cable and signal cable are securely connected. The POWER LED will turn orange.

2.Remove the lens cap. 

3.Turn on the lamp by pressing “ON/STAND-BY” on the control panel.  The POWER LED will now flash green.

The startup screen will display in approximately 5 seconds. When disappear startup screen, the POWER LED will turn green.

4.Turn on your source (computer, notebook, video player, etc.) The projector will detect your source automatically.

If you connect multiple sources at the same time, use the “INPUT” on the remote control or use “COMPUTER 1”, “COMPUTER 2”, “S-VIDEO”, “VIDEO”, “HDMI” on the remote control to switch inputs.

English

Note

Turn on the projector

first and then the signal

sources.

1	2
Lens Cap	Power

15