On Screen Display
The Projector has a multilingual On Screen Display that al- lows you to make image adjustments and change a variety of
settings. The projector will automatically detect the source.
How to operate
1.To open the OSD, press “MENU” on the Remote Control.
2.When OSD is displayed, use keys to select any item in the main menu. While making a selection on a particular page, press key to enter sub menu.
3.Use keys to select the desired item in the sub menu and
adjust the settings by key.
4.If the setting has icon, you could press “ENTER” to enter another sub menu. Press “MENU” to close the sub menu after adjustment.
5.After adjusting the settings, press “MENU” go back to the main menu.
6.To exit, press “MENU” again. The OSD will be closed and the projector will automatically save the new settings.
English
Note
If no button operation is made for 30 seconds, the OSD will be closed automatically.
Main Menu
Sub Menu | Setting |
17