Basic Operation
Keystone Adjustment
If a projected picture has keystone distortion, correct image with the keystone adjustment.
1 | Press KEYSTONE button on the remote control or select |
|
| |||||
| Keystone on the Setting menu (p38) to display the Keystone |
|
| |||||
| dialog box. |
|
|
| ||||
2 | Correct keystone distortion by pressing Point ed buttons. | – | Arrows are white in no correction. | |||||
| Press Point e button to reduce the upper part of image, and | – | The arrow of direction being corrected turns | |||||
| press Point d button to reduce the lower part. |
| ||||||
|
|
|
|
|
|
|
| red. |
|
|
|
|
|
|
| – | The arrow disappears at the maximum |
|
|
|
|
|
|
|
| correction. |
|
|
|
|
|
|
| – | If you press the KEYSTONE on the remote |
|
|
|
|
|
|
|
| control once more while the keystone dialog |
|
|
|
|
|
|
|
| box is being displayed, the adjustment will be |
|
|
|
|
|
|
|
| canceled. |
| Reduce the upper width with Point e button. | Reduce the lower width Point d button. | ||||||
|
|
|
|
|
|
|
|
|
Picture Freeze Function
Press the FREEZE button on the remote control to freeze the picture on the screen. To cancel FREEZE, press the FREEZE button again or press any other button. (p11)
No Show Function
Press the NO SHOW button on the remote control to black out the image. To restore to normal, press the NO SHOW button again or press any other button. When a projected image is captured and set as “User” in the Logo item in the Setting Menu (p40), the screen changes each time you press the NO SHOW button as follows.
black out ➜ the captured image ➜ normal ➜ • • • • •
The message disappears after 4 seconds.
22