Maintenance and Cleaning
Cleaning the Projection Lens
Follow these steps to clean the projection lens.
1 | Disconnect the AC power cord before cleaning. |
2 | Softly wipe the projection lens with a cleaning cloth that |
| contains a small amount of |
| cleaner, or use lens cleaning paper or a commercially |
| available air blower to clean the lens. Avoid using an |
| excessive amount of cleaner. Abrasive cleaners, solvents, or |
| other harsh chemicals might scratch the surface. |
3 | When the projector is not in use, replace the lens cover. |
Cleaning the Projector Cabinet
Follow these steps to clean the projector cabinet.
1 | Disconnect the AC power cord before cleaning. |
2 | Softly wipe the projector body with a soft, dry cleaning cloth. |
| When it is heavily soiled, use a small amount of mild |
| detergent and finish with a soft, dry cleaning cloth. Avoid |
| using an excessive amount of cleaner. Abrasive cleaners, |
| solvents, or other harsh chemicals might scratch the surface. |
3 | When the projector is not in use, put the projector in an |
| appropriate carrying case to protect it from dust and |
scratches.
Attaching the Lens Cover
When moving this projector or while not using it over an extended period of time, replace the lens cover.
1 | Thread the string through the hole on the lens cover and |
then tie a knot in the string to secure it in place. | |
2 | Thread the other end of the string through the hole at the |
bottom of the projector. Then pass the lens cover through |
the resulting loop of the string. Tie a knot in the string to secure it in place.
1
2 
Cleaning & Maintenance
47