Part Names and Functions

Rear Terminal

Names Part

q w

VIDEO AUDIO IN

COMPUTER / S-VIDEO /COMPONENT IN

RESET

✽

y

qVIDEO

Connect the composite video output from video equipment to VIDEO jack. (p16)

wAUDIO IN (Stereo)

Connect the audio output from computer or video equipment connected to q or y to this jack. (p15, 16)

eAUDIO OUT(VARIABLE)

Connect an external audio amplifier to this jack. (p15, 16)

This terminal outputs sound from AUDIO IN terminal.

rSERVICE PORT

This jack is used to service this projector.

✽A built-in micro processor which controls this unit may occasionally malfunction and need to be reset. This can be done by pressing the RESET

button with a pen, which will shut down and restart the unit. Do not use the RESET function excessively.

✔Note:

er

AUDIO OUT SERVICE PORT

(VARIABLE)

MONITOR OUT

t

tMONITOR OUT

This terminal outputs the signal coming from COMPUTER / S-VIDEO / COMPONENT IN terminal. (This terminal cannot output RGB(Scart) signal from COMPUTER / S-VIDEO / COMPONENT IN terminal.) (p15)

yCOMPUTER / S-VIDEO / COMPONENT IN

Connect S-video output, RGB Scart 21-pin video output, component video output or computer output to this connector. (p15)

Functions and

•Audio out and Monitor out terminal works only when the projector is under operation and do not work when the projector is in stand-by state or Power management mode (p41).

9