Basic Operation
Turning Off the Projector
1 | Press the POWER |
| remote control, and “Power off?” appears on the |
| screen. |
2 | Press the POWER |
| off the projector. The POWER indicator starts to blink |
| red, and the cooling fans keep running. (You can select |
| the level of the fans’ quietness and running speed. See |
| page 49.) At this time you can unplug the AC power |
| cord even if the fans are still running. |
3 | When the projector has cooled down enough to be |
| turned on again, the POWER indicator stops blinking. |
TO MAINTAIN THE LAMP LIFE, ONCE YOU TURN THE PROJECTOR ON, WAIT AT LEAST 5 MINUTES BEFORE TURNING IT OFF.
DO NOT OPERATE THE PROJECTOR CONTINUOUSLY WITHOUT REST. CONTINUOUS USE MAY RESULT IN SHORTENING THE LAMP LIFE. TURN OFF THE PROJECTOR AND LET STAND FOR ABOUT AN HOUR IN EVERY 24 HOURS.
Note:
•When the On start function is “On,” this projector is turned on automatically by connecting the AC power cord to an AC outlet (p. 46).
•The running speed of cooling fans is changed according to the temperature inside the projector.
•Do not put the projector in a case before the projector is cooled enough.
•If the WARNING indicator blinks or emits a red light, see “Warning Indicator” on page 51.
•While the POWER indicator is blinking, the lamp is being cooled down and the projector cannot be turned on. Wait until the POWER indicator stops blinking to turn on the projector again.
•The fan rotation will terminate directly if the AC power cord is unplugged immediately after the projector is turned off.
•The projector can be turned on after the POWER indicator turns red. The waiting time to restart will be shortened when the normal
Power off?
“Power off” disappears after 4 seconds.
19
