BEFORE OPERATION
1Remove the battery compartment lid.
OPEN
2 Slide the batteries into the compartment.
Note : For correct polarity (+ and - terminal), be sure the battery terminals are in contact with the pins in the compartment.
3 Replace the compartment lid.
OPEN
The remote control unit can be used as wireless or wired remote control.
Point the remote control toward the projector (Receiver window) whenever pressing the buttons. Maximum operating range for the remote control is about 16.4' (5m) and 60° front and rear of the projector.
60°
Connect a remote control cable to R/C jacks located on the wireless/wired remote control unit and the side of the projector.
R/C JACK
60°
SERIAL PORT
WIRED REMOTE CABLE
29