Sanyo manual SERVICE

APPENDIX

Problem:	Try these Solutions:
Picture is T/B inverted.	Check Reverse T/B feature.
	(See "SETTING" section on pages 48 ~ 49).
Picture is L/R Reversed.	Check Reverse L/R feature.
	(See "SETTING" section on pages 48 ~ 49).
Some displays are not seen	Check Display feature.
during the operation.	(See "SETTING" section on pages 48 ~ 49).
No sound.	● Check audio cable connection from audio input source.
	● Adjust audio source.
	● Press the VOLUME (+) button.
	● Press the MUTE button.
Remote control unit doesn't	● Check the batteries.
work.	● Make sure nothing is blocking between the remote control sensor and remote
	control unit.
	● Make sure you are not too far from the projector when using the remote control
	unit. {Maximum operate range 16.4 ' (5 m)}.
	● Check the transmitted signal mode from the remote control unit.
	(See "SETTING" section on pages 48 ~ 49).
Wireless mouse function	● Check the cable connection between the projector and the computer.
does not work.
	● Check the mouse setting on your computer.
	● Turn on the projector before you turn on the computer.

SERVICE

WARNING: High voltages are used to operate this projector. Do not attempt to open the cabinet.

You can often correct operating problems yourself. If the projector fails to work properly, see "TROUBLESHOOTING" section on page 53, 54. To correct the failure, try the "Solutions".

If after following all operating instructions, you find that service is necessary, contact the Sanyo Service Station or the store where you purchased the unit.

Give the model number and explain the difficulty. We will advise you how to obtain service.

This symbol on the nameplate means the product is Listed by Underwriters Laboratories Inc. It is designed and manufactured to meet rigid U.L. safety standards against risk of fire, casualty and electrical hazards.

The CE Mark is a Directive conformity mark of the European

Community (EC).

54