Maintenance and Cleaning

Indicators and Projector Condition

Main Indicators

Indicators

READY WARNING

 

Projector Condition

LAMP

Green

TEMP

Red

Red

 

 

 

 

 

 

 

 

 

 

The projector is OFF. (The AC power cord is unplugged.)

The projector is preparing for stand-by or the projection lamp is being cooled down. The projector cannot be turned on until cooling is completed.

The projector is ready to be turned on with the POWER ON-OFF button.

The projector is operating normally.

The projector is in the Power management mode.

 

 

 

The temperature inside the projector is abnormally high. The projector cannot

 

 

 

be turned on. When

the projector is cooled down enough and the

 

 

 

temperature returns to normal, the LAMP indicator lights red and the

 

 

 

projector can be turned on.

 

 

 

 

 

 

 

 

The projector has been cooled down enough and the temperature returns to

 

 

 

normal. When turning on the projector, the WARNING TEMP indicator stops

 

 

 

blinking. Check and clean the air filters.

 

 

 

 

 

 

 

 

The projector detects an abnormal condition and cannot be turned on. Unplug

 

READY, WARNING

 

 

TEMP, SHUTTER,

 

the AC power cord and plug it again to turn on the projector. If the projector

 

WARNING FILTER, LAMP

 

is turned off again, disconnect the AC power cord and contact the dealer or

 

1 REPLACE, AND LAMP 2

 

the service center for service and checkup. Do not leave the projector on. It

 

REPLACE indicators are

 

 

 

may cause electric shock or a fire hazard.

 

 

blinking all together.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

LED Conditions:

• • • Off

• • • Lighting

• • • Dim lighting

• • • Blinking

Cleaning & Maintenance

65