Maintenance and Cleaning

Lamp Replace Indicators

Indicators

READY

LAMP

LAMP 1/2

Projector Condition

REPLACE

 

Green

Red

 

 

Orange

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The lamp cannot light up. (The projector is preparing for stand-by or the

 

 

 

 

 

projection lamp is being cooled down. The projector cannot be turned on

 

 

 

 

 

until cooling is completed.)

 

 

 

 

 

 

 

 

 

Slow

 

 

 

 

 

 

 

 

 

 

 

 

The lamp cannot light up. (The lamp has been cooled down enough and the

 

 

 

 

 

projector is in stand-by mode and ready to be turned on with the POWER

 

 

 

 

 

ON-OFF button.)

 

 

 

Slow

 

 

The lamp is not installed in the projector.

Fast

The lamp of which indicator is lighting has been used overtime. Replace the lamp and then reset the Lamp time. The indicator will turn off.

Both

Either lamp cover is not replaced or fit in.

Both of the indicators keeps blinking three times at regular intervals and the projector cannot be turned on.

Slow

Cleaning & Maintenance

✽When the LAMP 1 REPLACE indicator and the LAMP 2 REPLACE indicator light orange, replace the projection lamps with new ones promptly. And then reset the Lamp time after replacement of the lamps. See pages 57, 62, and 63.

67