Sanyo PLC-EF60A, PLC-XF60A CAUTION :

Maintenance and Cleaning

Lamp Replacement

When the life of the projection lamps of this projector draw to an end, the LAMP 1 and 2 REPLACE indicators light orange. If one of these indicators lights orange, replace the lamp with a new one promptly.

Follow these steps to replace the lamp.

CAUTION :

DO NOT OPERATE A PROJECTOR WHILE ANY OF LAMPS IS REMOVED. IT MAY RESULT IN MALFUNCTIONS, FIRE HAZARD, OR OTHER ACCIDENTS.

Contents

Page Features and Design Trademarks Remark Table of Contents To The Owner Safety Instructions CAUTION Bottom Front Downward Upward USE CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR Compliance Page qLAMP 1 REPLACE indicator wWARNING TEMP indicator eWARNING FILTER indicator rLAMP indicator tREADY indicator Preparation qLENS SHIFT button wMENU button eCANCEL button Point buttons Page Page qSHUTTER button wKEYSTONE button eLENS SHIFT button rCONTROL PAD (semiconductive touchpad) About Control Pad qMENU button wFREEZE button tCH button yID button uP-TIMERbutton 1 Set the Remote Control Channel 2 Set the Remote Control ID Initialize the Remote Control Channel and ID Table1: Remote Control Channel & Frequency Table2: Remote Control ID Caution about Radio Wave Caution in Wireless LAN Interference Installation Installation For the U.S.A. and Canada For Continental Europe For the U.K (120 V AC) (200 - 240 V AC) Page Cables used for connection Note: Page Page Wireless Remote Control Operation Projector Top Control Operation Operation Basic Operations & Buttons Ref. Pages On-Off 27 Lens Shift Selected Input and Source Enter a PJ PIN code PJ PIN code Input Dialog Box What is PIN code CAUTION ON HANDLING PIN CODE Page Remote Control Top Control FREEZE SCREEN SHUTTER button INPUT button Input SCREEN button Normal Wide True Full screen Custom D. Zoom + D. Zoom – Remote Control Operation MENU button CANCEL button SELECT button Point buttons On-ScreenMenu Menu icons What You Can Do with Each Menu Page no INPUT : SYSTEM : Input Input 4/Input System Video or S-VideoSignal Selection PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N Component Signal Selection COMPONENT VIDEO SIGNAL FORMAT AV System Menu (Video or S-Video) Computer Adjustment Manual PC Adjust Fine sync Total dots Current mode Clamp Position V-syncphase Mode Store Free Image Menu (PC) Standard Real Adjustment Image Contrast Brightness Color Tint Color management Color management list Auto picture control Color temp Red Green Gamma Noise reduction Progressive Film Store Screen Setting D.Zoom D. Zoom Keystone Keystone Ceiling Setting Logo Logo select Capture Lock Enter a Logo PIN code PIN Code Change Background Control Remote control To change CH and ID for the projector; Display Input search Power management On start Power management Analog out Lens memory Shutter Level Protection Shutter Management Security Key lock USB lock PJ lock To Change the PJ PIN Code setting To Change PJ PIN Code CAUTION: Enter a PIN code Factory default Factory default Special Test pattern RS-232C USB memory Test pattern RS-232C USB memory Warning log Warning log Information Maintenance and Cleaning Page CAUTION : Cleaning & Maintenance LAMP HANDLING PRECAUTIONS IF A LAMP EXPLODES, THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE TAKEN Page Main Indicators Projector Condition LED Conditions: Shutter Indicator Warning Filter Indicator Lamp Replace Indicators Appendix Some displays are not seen during the Operation Only part of image is displayed (Large/Small) PIN code dialog box appears at Page Page Mechanical Information Panel Resolution PLC-XF60A PLC-EF60A Signal Compatibility SCART-VGACable Projector USB Key Smoke Resist Box Wired Remote Cable (30m) Advanced Network INPUT SYSTEM SCREEN SETTING PC ADJ IMAGE ADJ INFORMATION Input SPECIALLamp Page ANALOG INPUT / OUTPUT TERMINAL (ANALOG) Terminal: HDB15-PIN DVI-DTERMINAL (DIGITAL) Terminal: DVI-D SERIAL PORT IN /OUT TERMINAL Factory default set No: 1 2 3 4 Factory default set No: 4 3 2 1 Numerics