Sanyo PLC-XT21 Connecting to a Computer Digital and Analog RGB, Cables used for connection

Installation

Connecting to a Computer (Digital and Analog RGB)

Cables used for connection

• VGA Cable (HDB 15 pin)*	• USB Cable
• DVI-Digital Cable	• Audio Cables (Mini Plug [stereo] x 2)
• BNC Cable

(*One cable is supplied; other cables are not supplied with the projector.)

Monitor			Audio	Monitor Output	Monitor		Monitor	USB port	External Audio Equipment
Input			Output		Output		Output
									Audio Input
VGA		Audio		BNC	VGA	DVI-Digital		USB
		cable
cable				cable	cable	cable		cable
		(stereo)
ANALOG			AUDIO	G B R H/V V	ANALOG		DIGITAL	USB
	OUT		IN			IN	(DVI-D)

Audio cable (stereo)

	AUDIO OUT
✔Notes:	(stereo)

•When the AUDIO OUT is plugged-in, the projector’s built-in speaker is not available.

•USB cable connection is needed when operating the computer with the remote control.

•See page 78 for ordering optional cables.

Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables.

22