Basic Operation
Turning Off the Projector
1 | Press the |
|
|
|
|
| the |
|
|
|
|
| “Power off?” appears on the screen. |
|
|
|
|
2 | Press the |
|
|
|
|
|
|
|
| ||
|
|
|
| ||
| button on the remote control again to turn off the |
|
|
|
|
| projector. The LAMP indicator turns off and the POWER |
|
|
|
|
| indicator starts to blink green. After the projector is |
|
|
|
|
| “Power off?” disappears after 4 seconds. | ||||
| turned off, the cooling fans operates for 90 seconds. | ||||
| During the POWER indicator is blinking, you cannot turn |
|
|
|
|
| on the projector. |
|
|
|
|
3 | When the projector has cooled down enough, the |
|
|
|
|
| POWER indicator stops blinking and you can turn on |
|
|
|
|
the projector. After it is cooled down completely, unplug the AC power cord.
TO MAINTAIN LIFE OF THE LAMP, ONCE YOU
TURN THE PROJECTOR ON, WAIT AT LEAST FIVE
MINUTES BEFORE TURNING IT OFF.
DO NOT UNPLUG THE AC POWER CORD WHILE
THE COOLING FANS ARE RUNNING OR BEFORE
THE POWER INDICATOR STOPS BLINKING.
OTHERWISE IT WILL RESULT IN SHORTENING
THE LAMP LIFE.
DO NOT OPERATE THE PROJECTOR
CONTINOUSLY WITHOUT REST. CONTINUOUS
USE MAY RESULT IN SHORTENING THE LAMP
LIFE. TURN OFF THE PROJECTOR AND LET
STAND FOR ABOUT AN HOUR IN EVERY 24
HOURS.
✔Notes:
•When the On start function is set to “On,” the projector will be turned on automatically by connecting the AC power cord to an AC outlet (p.58).
•The running speed of cooling fans is changed according to the temperature inside the projector.
•Do not put the projector in a case before the projector is cooled enough.
•If the WARNING TEMP. indicator blinks or all the five indicators on the top panel blink, see “Warning Indicators” on page 67.
•While the POWER indicator is blinking, the lamp is being cooled down and the projector cannot be turned on. Wait until the POWER indicator stops blinking to turn on the projector again.
26
