Basic Operation

Turning Off the Projector

1

Press the ON/STAND-BY button on the top control or

 

 

 

 

 

the STAND-BY button on the remote control, and

 

 

 

 

 

“Power off?” appears on the screen.

 

 

 

 

2

Press the ON/STAND-BY button or the STAND-BY

 

 

 

 

 

 

 

 

 

 

 

 

 

button on the remote control again to turn off the

 

 

 

 

 

projector. The LAMP indicator turns off and the POWER

 

 

 

 

 

indicator starts to blink green. After the projector is

 

 

 

 

 

“Power off?” disappears after 4 seconds.

 

turned off, the cooling fans operates for 90 seconds.

 

During the POWER indicator is blinking, you cannot turn

 

 

 

 

 

on the projector.

 

 

 

 

3

When the projector has cooled down enough, the

 

 

 

 

POWER indicator stops blinking and you can turn on the projector. After it is cooled down completely, unplug the AC power cord.

TO MAINTAIN LIFE OF THE LAMP, ONCE YOU

TURN THE PROJECTOR ON, WAIT AT LEAST FIVE

MINUTES BEFORE TURNING IT OFF.

DO NOT UNPLUG THE AC POWER CORD WHILE

THE COOLING FANS ARE RUNNING OR BEFORE

THE POWER INDICATOR STOPS BLINKING.

OTHERWISE IT WILL RESULT IN SHORTENING

THE LAMP LIFE.

✔Notes:

•When the On start function is set to “On,” the projector will be turned on automatically by connecting the AC power cord to an AC outlet (p.58).

•Do not operate the projector continuously without rest. Continuous use may result in shortening the lamp life. Turn off the projector and let stand for about an hour in every 24 hours.

•The running speed of cooling fans is changed according to the temperature inside the projector.

•Do not put the projector in a case before the projector is cooled enough.

•If the WARNING TEMP. indicators blinks or all the five indicators on the top panel blink, see “Warning Indicators” on page 67.

•While the POWER indicator is blinking, the lamp is being cooled down and the projector cannot be turned on. Wait until the POWER indicator stops blinking to turn on the projector again.

26