Appendix

WARNING FILTER indicator

Indicators

POWER

LAMP

WARNING

Projector Condition

FILTER

 

green

red

 

orange

 

 

 

 

 

 

 

 

 

 

 

The filter is clogged. Stop using the projector immediately and clean

 

 

 

or replace the filter (see below).

 

 

 

 

––––

––––

 

The Filter counter reached a set time. Clean or replace the filter as

 

soon as possible.

 

 

 

 

 

 

 

If filter clogging is detected during operations, the Filter warning icon (red) appears on the screen and the WARNING FILTER indicator blinks orange, urging you to clean or replace the filter. Stop using the projector immediately and clean or replace the filter. The WARNING FILTER indicator and Filter warning icon will not be turned off until the filter is cleaned or replaced by a new one.

Filter warning icon (red) appears on the screen when the projector detects filter clogging.

✔Note:

•The Filter warning icon (red) will not appear during “Freeze” (p.31), or “Now show” (p.32).

LAMP REPLACE indicator

Indicators

POWER

LAMP

LAMP

Projector Condition

REPLACE

 

green

red

 

yellow

 

 

 

 

 

 

 

 

 

 

 

The lamp cannot light up. (The projector is preparing for stand-by or

 

 

 

the projection lamp is being cooled down. The projector cannot be

 

 

 

turned on until cooling is completed.)

 

 

 

 

 

 

 

The lamp cannot light up. (The lamp has been cooled down enough

 

 

 

and the projector is in stand-by mode and ready to be turned on with

 

 

 

the ON/STAND-BY button.)

 

 

 

 

 

 

 

The lamp has been used overtime. Replace the lamp immediately

––––

––––

 

and then reset the lamp counter. The indicator will be turned off

 

 

 

after resetting the counter.

 

 

 

 

*When the projection lamp reaches its end of life, the LAMP REPLACE indicator lights yellow. When this indicator lights yellow, replace the projection lamp with a new one promptly. Reset the lamp counter after replacing the lamp. See pages 65–66.

74