Appendix

Indicators and Projector Condition

Check the indicators for the projector condition.

WARNING TEMP. indicatorIndicators

POWER

LAMP

WARNING

Projector Condition

TEMP.

 

green

red

 

red

 

 

 

 

 

 

 

 

 

 

 

The projector is off. (The AC power cord is unplugged.)

 

 

 

 

 

 

 

The projector is in stand-by mode. Press the ON/STAND-BY button

 

 

 

to turn on the projector.

 

 

 

 

 

 

 

The projector is operating normally.

 

 

 

 

 

 

 

The temperature inside the projector is abnormally high. The

 

 

 

projector cannot be turned on. When the projector is cooled down

 

 

 

enough and the temperature returns to normal, the POWER indicator

 

 

 

stops blinking and the projector can be turned on. (The WARNING

 

 

 

TEMP. indicator keeps blinking.) Check and clean the filter.

 

 

 

 

 

 

 

The projector has been cooled down enough and the temperature

 

 

 

returns to normal. When turning on the projector, the WARNING

 

 

 

TEMP. indicator stops blinking. Check and clean the filter.

 

 

 

 

 

 

 

The projector is preparing for stand-by or the projection lamp is

 

 

 

being cooled down. The projector cannot be turned on until cooling

 

 

 

is completed and the POWER indicator stops blinking.

 

 

 

 

POWER, LAMP,

 

The projector detects an abnormal condition and cannot be turned

WARNING TEMP.,

 

on. Unplug the AC power cord and plug it again to turn on the

WARNING FILTER, and

 

projector. If the projector is turned off again, unplug the AC power

LAMP REPLACE

 

 

cord and contact the dealer or the service center. Do not leave the

indicators are blinking all

 

together.

 

 

projector on. It may cause an electric shock or a fire hazard.

 

 

 

 

 

 

 

The projector is in the Power management mode.

 

 

 

 

• • • lighting

• • • blinking

• • • off

73