Basic Operation

NO SHOW button

Press the NO SHOW button on the remote control to black out the image. To restore to normal, press the NO SHOW button again or press any other button.

P-TIMER button

Press the P-TIMER button on the remote control. The P- Timer display “00:00” appears on the screen and the countdown starts (00:00–59:59).

To stop the countdown, press the P-TIMER button. To cancel the P-Timer function, press the P-TIMER button again.

KEYSTONE button

Press the KEYSTONE button on the remote control. The “Keystone” appears on the screen.

Use the Point ed buttons to correct keystone distortion. The keystone adjustment can be stored (see page 50).

Reduce the upper width

Reduce the lower width

with the Point e button.

with the Point d button.

“No show” disappears after 4 seconds.

P-Timer display

Remote Control

P-TIMER

 

button

KEYSTONE

 

button

 

NO SHOW

 

button

✔Note:

•See the previous page for the description of other buttons.

•The white arrows indicate that there is no correction.

•A red arrow indicates the direction of correction.

•An arrow disappears at the maximum correction.

•If you press the KEYSTONE button on the remote control once more while the keystone dialog box is being displayed, the keystone adjustment will be canceled.

32