①SELECT button
–Execute the selected item (p.23).
–Expand or compress the image in the Digital zoom mode (p.38).
②POINT ▲▼◄► (VOLUME +/–) buttons
–Select an item or adjust the value in the On-Screen Menu (p.23).
–Pan the image in the Digital zoom + mode (p.38).
–Adjust the volume level (Point ◄► buttons) (p.26).
③AUTO SETUP/CANCEL button
–Correct vertical keystone distortion and adjust computer display parameters such as Fine sync., Total dots, and Picture position (pp.25, 46).
–Display the image in SD card or return to the menu bar in Memory Viewer menu.
Refer to the owner's manual of "Network Set-up and Operation" and owner's manual of Memory viewer.
④POWER indicator
–Lights red when the projector is in stand-by mode.
–Lights green during operations.
–Blinks green in the Power management mode (p.51).
⑤LAMP REPLACE indicator
Lights yellow when the projection lamp reaches its end of life (pp.60, 68).
⑥WIRELESS indicator
Turn green when the projector is in the network mode.
⑦MENU button
Open or close the On-Screen Menu (p.23).
⑧INPUT button
Select an input source (pp.29–30, 39–40).
⑨ON/STAND–BY button
Turn the projector on or off (pp.21–22).
⑩WARNING TEMP.. indicator
–Lights red when the projector detects an abnormal condition.
–Blinks red when the internal temperature of the projector exceeds the operating range (pp.57, 68).