Computer Input

Input Source Selection (RGB(PC digital), RGB(AV HDCP))

Direct Operation

Top Control

Choose Computer 1(Digital) by pressing the INPUT button on the top control or press the COMPUTER button on the remote control.

Before using these buttons, correct input source should be selected through Menu operation as described below.

INPUT button

Computer 1 (Analog)

Computer 1 (Digital)

Computer 2

Video

Wired

Wireless

Menu Operation

1

Press the MENU button to display the On-Screen

Menu. Use the Point ◄► buttons to move the red

 

frame pointer to the Input Menu icon.

2

Use the Point ▲▼ buttons to move the red arrow

pointer to Computer 1 (Digital), and then press the

 

SELECT button.

3

After the Source Select Menu appeared for Computer 1

(Digital), move the pointer to RGB (PC digital) or RGB

(AV HDCP), and then press the SELECT button.

Notes:

•HDCP (High-bandwidth Digital Content Protection) is a system for protecting digital entertainment content delivered by DVI (Digital Visual Interface) from being copied. The specification of HDCP is decided and controlled by Digital Content Protection, LLC. Should the specification be changed, this projector may not display the digital content protected by HDCP.

•Wired and Wireless are for the Network function. See owner’s manual “Network Set-up and Operation” .

•When the Input Search function is set to “On1” or “On2”, the input signal will be searched automatically (p.50).

•When Monitor out is selected in the Terminal function (p.50), Computer 2 is not displayed.

Remote Control

COMPUTER button

Computer 1 (Analog)

Computer 1 (Digital)

Computer 2

Input Menu icon

Input Menu

Move

the pointer

( r e d

a r r o w ) t o

Computer 1 (Digital) a n d p r e s s t h e SELECT button.

Computer

1

Move the pointer to the source that you want to select and press the SELECT button.

30