Computer Input

Custom

Adjust the screen scale and position manually with this function.

Press the SELECT button at Custom and the “Custom” is displayed on the screen for a few seconds and then the Aspect dialog box appears.

Scale H/V...........

Adjust the Horizontal/Vertical screen

 

scale.

H&V....................

When set to “On,” the aspect ratio is

 

fixed. The “Scale V” appears dimmed

 

and becomes unavailable. Adjust “Scale

 

H,” then the screen scale is automatically

 

modified based on the aspect ratio.

Position H/V.......

Adjust the Horizontal/Vertical screen

 

position.

Common.............

Save the adjusted scale to all the inputs.

 

Press the SELECT button at Common to

 

display a confirmation box. To save the

 

scale, press the SELECT button at “Yes.”

 

When Custom is selected, the saved

 

scale is used.

Reset..................

Reset the all adjusted values. Press

 

the SELECT button at Reset to display

 

a confirmation box. To reset, press the

 

SELECT button at “Yes.”

For zooming in and out the images

Digital zoom +

Select Digital zoom +. The On-Screen Menu disappears and “D. zoom +” appears. Press the SELECT button to expand the image size. Use the Point ▲▼◄► buttons to pan the image. The Panning function can work only when the image is larger than the screen size.

A projected image can be also expanded by pressing the D.ZOOM ▲ button on the remote control.

Digital zoom –

Select Digital zoom –. The On-Screen Menu disappears and “D. zoom –” appears. Press the SELECT button to compress image size.

The projected image can be also compressed by pressing the D.ZOOM ▼ button on the remote control.

To exit the Digital zoom +/– mode, press any button except the D.ZOOM ▲▼ buttons, SELECT, and Point buttons.

To return to the previous screen size, select a screen size from the Screen Size Adjustment Menu or select an input source from the Input Source Selection Menu (see pages 29-30) again, or adjust the screen size with the D.ZOOM ▲▼ buttons.

Press the SELECT button at Common or Reset, to display a confirmation box.

Notes:

• When no signal is detected, “Normal” is set a u t o m a t i c a l l y a n d t h e A s p e c t d i a l o g b o x disappears.

•The adjustable range for Scale H/V and Position H/V is limited depending on the input signal.

Remote Control

POINT buttons

SELECT button

D..ZOOM + button

D..ZOOM - button

Notes:

•The panning function may not operate properly if the stored Mode in the PC Adjust Menu is used (p.34).

•The minimum compression ratio is limited depending on the input signal, when the Keystone function is working or when the custom is selected for the screen size.

•True, Full, and Digital zoom +/– cannot be selected when 480i, 575i, 480p, or 575p is selected in the PC System Menu (p.31).

•Digital zoom +/- cannot be selected when Full or True is selected.

38