Basic Operation
Turning Off the Projector
1 | Press the POWER |
|
|
|
|
|
|
|
| ||
control or on the remote control, and “Power off?” |
|
|
|
| |
| appears on the screen. |
|
|
|
|
2 | Press the POWER |
|
|
|
|
|
|
|
| ||
off the projector. The POWER indicator starts to blink |
|
|
|
| |
| red, and the cooling fans keep running. (You can select |
|
|
|
|
| the level of fans’ quietness and speed. See “Fan” on |
|
|
|
|
| “Power off?” disappears after 4 seconds. | ||||
| page 55.) At this time, you can unplug the AC power | ||||
| cord even if the fans are still running. |
|
|
|
|
3 | When the projector has cooled down enough, the |
|
|
|
|
POWER indicator stops blinking and you can turn on |
|
|
|
| |
the projector.
TO MAINTAIN THE LIFE OF THE LAMP,
ONCE YOU TURN THE PROJECTOR ON,
WAIT AT LEAST FIVE MINUTES BEFORE
TURNING IT OFF.
DO NOT OPERATE THE PROJECTOR
CONTINUOUSLY WITHOUT REST.
CONTINUOUS USE MAY RESULT IN
SHORTENING THE LAMP LIFE. TURN
OFF THE PROJECTOR AND LET STAND
FOR ABOUT AN HOUR IN EVERY 24
HOURS.
Notes:
•When the On start function is set to “On,” the projector will be turned on automatically by connecting the AC power cord to an AC outlet (p.52).
•The running speed of cooling fans is changed according to the temperature inside the projector.
•Do not put the projector in a case before the projector is cooled enough.
•If the WARNING TEMP. indicator blinks or lights red, see “WARNING TEMP. indicator” on page 57.
•While the POWER indicator is blinking, the lamp is being cooled down and the projector cannot be turned on. Wait until the POWER indicator stops blinking to turn on the projector again.
•The fan rotation will terminate directly if the AC power cord is unplugged immediately after the projector is turned off.
•The projector can be turned on after the POWER indicator turns red. The waiting time to restart will be shortened when the normal
cooling is completed, compared with the time the AC power cord is immediately unplugged after the power- off.
22