Sanyo PLC-XW57 owner manual Display, Logo Logo and Logo PIN code lock settings, Logo select

Setting

Display

Press the Point ◄► buttons to switch On/Off. This function decides to display On-Screen Displays.

On	Show all the On-Screen Displays.
	Use this function when you want
	to project images after the lamp
	becomes bright enough. Factory
	default setting is this mode.
Countdown off . .	Show the input image instead of
	the countdown when turning on
	the projector. Use this function
	when you want to project the
	image as early as possible even
	when the lamp is not bright
	enough.
Off	Do not show On-Screen Displays,
	except.

● On-Screen Menu

● "Power off?" message (p.19)

● P-Timer

● "No signal" message for Power management item

(p.46)

● "Please wait..." message

● Arrows for panning mode (p.32)

Logo (Logo and Logo PIN code lock settings)
This function allows you to customize the screen logo
with Logo select, Capture, and Logo PIN code lock
functions.
 Note:	Logo select

When On is selected in Logo PIN code lock function, Logo select and Capture functions cannot be selected.

Logo select

This function decides the start-up display as follows:

User . . the image you captured

Default . the factory-set logo

Off . . . countdown only

42