Part Names and Functions

Remote Control Battery Installation

1

Open the battery

 

compartment lid.

2

Install new batteries

 

into the compartment.

Two AA size batteries

For correct polarity

(+ and –), be sure battery terminals are in contact with pins in the compartment.

3

Replace the

 

compartment lid.

To ensure safe operation, please observe the following precautions:

Use two (2) AA or LR6 type alkaline batteries.

Always replace batteries in sets.

Do not use a new battery with a used battery.

Avoid contact with water or liquid.

Do not expose the remote control to moisture or heat.

Do not drop the remote control.

If the battery has leaked on the remote control, carefully wipe the case clean and install new batteries.

Risk of explosion if a battery is replaced by an incorrect type.

Dispose of used batteries according to the instructions.

Operating Range

Point the remote control toward the projector (Infrared Remote Receiver) when pressing any button. Maximum operating range for the remote control is about 16.4' (5 m) and 60° in front of the projector.

16.4' (5 m)

30°

30°

12

Page 12
Image 12
Sanyo PLC-XW57 owner manual Remote Control Battery Installation, Operating Range