Safety Instructions
The installation work should be performed by at least two qualified service personnel. If you need to loosen any screws during installation, be careful not to drop the setting plate.
If mounting the projector on a wall with the setting plate, the wall must have enough strength to hold the projector and setting plate. Confirm the weight of the projector and the setting plate before installation, and check the strength of the wall. If the wall is not strong enough, reinforce the wall before installation.
Tighten all screws firmly after adjustment.
Inspect the setting plate on a regular basis to ensure there are no broken parts or loose screws.
Install the setting plate to a vertical wall. Do not install to a leaning wall.
Do not install the setting plate in greasy or smoky place to prevent breakdown or abra- sion of the projector’s components.
Do not install the setting plate in steamy, smoky or highly humid places in order to pre- vent fire or electric shock.
Do not use a setting plate with damaged parts. The projector or setting plate may fall and cause personal injury or property damage.
English
CAUTION
Do not install the setting plate in a location where the operating temperature for your projector model may be exceeded. Such an environment may damage the projector.
Install the setting plate in a place free from excessive dust and humidity to prevent the lens or optical components of the projector from becoming dirty.
2
10.9.8 11:21:13 AM
