Sanyo POA-CH-EX06 installation manual Securing the projector to the setting plate

Installation Procedure

Securing the projector to the setting plate

1 Attach the adjustment unit to the projector using the included 5 screws (M4 x 18).

Screws

Adjustment unit

Projector

English

2 Remove the two bolts (for drop-prevention) from the setting plate. Loosen the four bolts located on the top of the adjustment unit and set the projector with the adjust- ment unit onto the setting plate.

Bolts

Setting plate

Loosen bolts

Projector with the adjustment unit

3 Tighten the four bolts which were loosened to secure the projector to the setting plate. Attach the two bolts (for drop-prevention) to the setting plate.

Bolts

6

POA-CH-EX06(IJAH).indb 6

10.9.8 11:21:14 AM