Sanyo POA-CH-EX06

Installation Procedure

Attach the setting plate to the wall plate

1Hang the setting plate hook onto the wall plate slits.

2Tighten the four M8 x 20 mm hexagon socket head cap bolts supplied

with the setting plate. (Secure temporarily so that the adjustment men-

tioned on page 7 can be carried out.)

3Attach the left and right cover plates to the setting plate using the two

M5 x 10 mm hexagon socket head cap bolts included. (Secure temporar-

ily so that the adjustment mentioned on page 7 can be carried out.)

Wall plate

Setting plate

Bolts

Contents

Main Installation Manual Setting Plate for Wall Hanging Model POA-CH-EX06 EnglishFranaisEspaolDeutschItalianoPortugus Contents Be sure to consult with a quali ed installation specialist. Safety Instructions Explanation of Symbols WARNING CAUTION WARNING CAUTION Safety Instructions List of Accessories Installation Procedure Install the wall plate to the wall WARNING 1 2 3 4 5 Page Securing the projector to the setting plate 1 2 3 Adjustment 1 (Adjustable range: 0 - 180 mm) 2 3 4 5 Attach the drop-prevention wire to the projector Projection Distance Table SANYO PDG-DWL2500 Unit: inch (cm) Display Size ABCDEH SANYO PDG-DXL2000 Unit: inch (cm) Display Size ABCDEH Dimensions