Sanyo SAP-KRV123EH Operation with the Remote Control Unit continued, Adjusting the Fan Speed

01_SAP-KRV93EH_EN.fm Page 14 Thursday, February 12, 2004 12:10 PM

NOTE

Operation with the Remote Control Unit (continued)

•Choose the best position in the room for the remote control unit, which also acts as the sensor for room comfort and transmits the operating instructions. Once you’ve found this best position, always keep the remote control unit there.

•This appliance has a built-in 5-minute time delay circuit to ensure reliable operation. When the operation button is pressed, the compressor will start running within three minutes. In the event of power failure, the unit will stop.

3.Adjusting the Fan Speed

A.Automatic fan speed Simply set the FAN SPEED selector button to the position. This automatically sets the best fan speed for the room temperature.

B.Manual fan speed If you want to adjust fan speed manually during operation, just set the FAN SPEED selector button as desired. [ , , or ]

4.Fan Only

STEP 2

STEP 1

STEP 3

If you want to circulate air without any temperature control, follow these steps:

STEP 1 Press the MODE selector button to switch to the fan mode

.

STEP 2 Press the ON/OFF operation button.

STEP 3 Press the FAN SPEED selector button to select the fan speed of your choice (, or ).

14 OI-671-14-EG