Sanyo scp8300 manual Setting the Flash, Setting the Self-timer

Setting the Flash

To activate the flash:

1.From camera mode, press Options (right softkey).

2.Highlight Flash and press .

3.Select one of the following options and press :

Off to deactivate the flash.

On This Shot to activate the flash for one shot.

On Always to activate the flash for all pictures.

Auto to activate the flash automatically.

Note: While the phone is open and in camera mode, press to switch between flash modes.

Setting the Self-timer

To activate the Self-timer:

1.From camera mode, press Options (right softkey).

2.Highlight Self-timerand press .

3.Highlight the length of delay you want the timer to use (10 seconds or 5 seconds) and press .

To deactivate the Self-timer, highlight Off and press .

4.Press Start (left softkey) when you are ready to start the timer. ( appears on the lower left portion of the main LCD during the Self-timer countdown.)

5.Get ready for the picture. (When the timer is down to three seconds, the Self-timer icon will turn red and the phone will begin to beep.)

To cancel the Self-timer after it has started:

Press Cancel (right softkey).

Note: While the Self-timer is active, all keys are disabled except ,

, and Cancel (right softkey).

118