Using Speed Dialing

With this feature, you can dial Speed Dial entries using one key press for locations 2-9. (See page 69 for storing a Speed Dial number.)

To use speed dial for voice calls:

From standby mode, press and hold the appropriate key for approximately two seconds.

– or –

From standby mode, press the appropriate key and

press or .

The display confirms that the number has been dialed when it shows “Connecting...”.

To use speed dial for 10-4 calls:

From standby mode, press the appropriate key then press . (See “Setting Speed Dialing for 10-4 Entries” on page 113.)

The display confirms that the number has been dialed when it shows “10-4 calling...”.

Using Abbreviated Dialing

Abbreviated Dialing allows you to dial a number by entering 3-6 digits of any number in your Contacts Directory. (See “Setting Abbreviated Dialing” on page 58.)

1.Dial the last 3-6 digits of a contact’s phone number.

2.Press or .

Tip: If the Phone Book Match setting is on, you need to select an entry from a list before placing a call. (See page 58 for setting.)

Note: If there is no matched number, your phone dials the number you set for abbreviated dial with the last four or five digits you entered.

If there are matched numbers in your Contacts list, the abbreviated dial

list will be displayed. To place a call, select a number and press .

22