SAFETY PRECAUTIONS

CAUTION: Please read and retain for your safety.

This colour Monitor has been engineered and manufactured to assure your personal safety. But improper use can result in potential electric shock or fire hazards. In order not to defeat the safeguards incorporated in this receiver observe the following basic rules for its installation, use and servicing.

!

MINIMUM DISTANCES

10cm10cm

20cm

5cm

Installation

Do not allow anything to rest on the power cord

Do not locate this colour monitor where the cord will be damaged by people walking on it.

Do not overload wall outlets and extension cords as this can result in fire or electric shock.

Slots and openings in the cabinet and in the back or bottom are provided for ventilation to ensure reliable operation and to protect it from overheating. These openings must not be blocked or covered.

The opening should never be covered with a cloth or other material, and the bottom openings should not be blocked by placing the television receiver on a bed, sofa, rug, or other similar surface.

This colour monitor should never be placed near or over a radiator or heater. This colour monitor should not be placed in a built-in installation such as a bookcase unless proper ventilation is provided

Do not place your colour monitor on an unstable stand, shelf or table.

Serious injury to an individual, and damage to the monitor may result if it should fall. Your sales person can recommend approved stands or shelf and wall mounting instructions.

If the monitor is to be built into a compartment or similarly enclosed, the minimum distances must be maintained. Heat build-up can reduce the service life of your television, and can also be dangerous.

Use

!

This colour monitor should be operated only from the type of power source indicated on the monitor or as indicated in the Operating Instructions. If you are not sure of the type of power supply in your home, consult your sales person or your local power company.

Never add accessories that have not been specifically designed for this monitor.

Do not drop or push objects into the monitor cabinet slots or openings. Some internal parts carry hazardous voltages and contact may result in an electric shock hazard. Never spill liquids of any kind on the colour monitor. Do not place items such as vases containing liquid on top of the monitor.

Do not expose the colour monitor to rain or use near water. For example, near a bathtub, kitchen sink, in a wet basement, etc. Before cleaning, unplug the colour monitor from the wall socket.

Never stand on, lean on or push the monitor or its stand. Never allow children to play with the monitor or its stand. Serious injury may result if it should fall.

Do not apply liquid cleaners or aerosol cleaners directly onto the colour monitor. Use a damp cloth for cleaning.

Do not place candles or hot objects upon the monitor, next to it or behind it. Open flames must never be used near the monitor.

 

 

 

Important:

Note: The severed plug must be destroyed to avoid a possible

This equipment is fitted with an approved non rewireable UK

shock hazard should it be inserted into a 13Amp socket

mains plug.

elsewhere.

To change a fuse in this type of plug proceed as follows:

The wires in this mains lead are coloured in accordance with the

1. Remove the fuse cover and fuse.

following code:

2. Fix a new fuse which should be a BS1362 5Amp A.S.T.A. or

 

Blue -------> Neutral

BSI approved type.

1.

Brown ----> Live

3. Ensure that the fuse cover is correctly refitted.

The Blue wire must be connected to the terminal which is

If the fuse cover is lost or damaged the plug must NOT be used

2.

marked with the letter “N” or coloured BLACK.

but replaced with a serviceable plug.

The Brown wire must be connected to the terminal with the

If the fitted plug is not suitable for your socket outlets, it should

 

letter “L” or coloured RED.

be cut off and an appropriate plug fitted in its place. If the mains

3.

Do not connect either wire to the earth terminal in the plug

plug contains a fuse, this should have a rating of 5Amp,ensure

 

which is marked with the letter “E” or by the earth symbol or

the fuse cover is correctly fitted. If a plug without a fuse is used,

 

coloured GREEN or GREEN and YELLOW.

the fuse at the distribution board should not be greater than

Before replacing the plug cover, make certain that the cord grip

5Amp.

is clamped over the sheath of the lead - not simply over the

 

wires.

 

 

 

 

 

 

2

Page 1 Page 3
Page 2
Image 2
Sanyo VMC-7321P manual Safety Precautions, Installation, Use, Blue ------- Neutral, Brown ---- Live
Page 1 Page 3

VMC-7321P specifications

The Sanyo VMC-7321P is a highly regarded vertical machining center that has made its mark in the world of precision manufacturing. Known for its robust construction and advanced technologies, this machine is designed to deliver superior performance and versatility in a range of machining applications.

One of the standout features of the VMC-7321P is its high-speed spindle capability. With a spindle speed that can reach up to 8,000 RPM, this machine allows for efficient metal removal and fine surface finishes. The spindle's rigid design minimizes vibrations, ensuring stability during the machining process. Coupled with a powerful motor, the VMC-7321P offers both speed and torque, making it suitable for various materials, including aluminum, steel, and exotic alloys.

The machine is equipped with a large work table that provides ample space for various workpieces. This enhances its versatility, allowing it to handle larger components with ease. Additionally, the table's T-slot design facilitates quick and secure clamping of workpieces, streamlining setup times and boosting productivity.

An integral part of the VMC-7321P’s capabilities is its advanced CNC control system. This user-friendly interface allows operators to program complex machining tasks with ease. The control system supports G-code programming and features advanced look-ahead capabilities, optimizing cutting paths for efficiency. The intuitive design of the interface minimizes the learning curve for new users, making it accessible to a wider range of operators.

Precision is a hallmark of the Sanyo VMC-7321P. The machine features high-accuracy ball screws and linear guideways that contribute to its impressive repeatability and accuracy. This level of precision is crucial for industries that require intricate machining, such as aerospace and automotive manufacturing.

In terms of safety, the VMC-7321P comes equipped with various protective features to safeguard both the machine and the operator. These include emergency stop buttons, safety covers, and a coolant system that keeps the cutting tools and workpiece at optimal temperatures during operation.

Overall, the Sanyo VMC-7321P stands out in the realm of vertical machining centers. Its combination of robust design, high-speed capabilities, advanced CNC technology, and precision makes it an excellent choice for manufacturers looking to enhance their machining operations. Whether for high-volume production or intricate custom parts, the VMC-7321P offers the reliability and performance needed to excel in today's competitive landscape.
Top Page Image Contents