INSTALLATION / GENERAL OPERATION
Mains Supply
Switching-on your TV
AC Mains Outlet
Connect the power cord of the monitor to a wall outlet.
✐The monitor is prepared for a mains voltage AC220~240V, 50Hz. When the monitor is not to be used for an extended period of time, it is advisable to disconnect the power cord from the power outlet.
WARNING
High voltages are used in the operation of this set. Refer to qualified service personnel
AV Connection
■To turn the monitor ON, press the Mains ON/OFF 
switch. The power indicator illuminates to show the power is on.
F |
■To turn the monitor OFF, press the Mains ON/OFF 
switch again.
Be sure to set the Mains On/Off button to the OFF position if a power failure occurs.
! | If you find the power indicator flashing, please turn the |
monitor off completely with the Mains ON/OFF | |
| button and contact our service desk. |
| This warning is a sign to let you know that the power |
| protection function of this monitor is now operating. |
|
|
Terminal |
VIDEO IN
VIDEO OUT
AUDIO IN
AUDIO OUT
VIDEO IN
AUDIO OUT AUDIO IN VIDEO OUT
Description
BNC connector for video in. BNC connector for video out. BNC connector for audio in. BNC connector for audio out.
Control selection and adjustment
Press the F button repeatedly to select Volume, Brightness,
Contrast, Colour, Sharpness. Press the 
or 
button to adjust the selected control. When the control menu is not displayed, the 
or 
button enable you to switch programme position.
Volume : To adjust the sound volume.
Brightness : To adjust the picture brightness.
Contrast : To adjust the picture contrast.
Colour : To adjust the picture colour.
Sharpness : To adjust the picture sharpness.
Tint : To adjust the colour phase. (This appears when NTSC signals are input.)
F |
|
Standby light | |
and down |
Function key
Remote sensor
Mains On / Off switch
3
